If you facilitated this course and persons other than you went through
this course, please fill out their names below. Each student must be
individually registered and paid for to get credit for this course.
1.
While performing work on the right of way, contractors must expect trains,
engines, or roadway machines on all tracks, at all times, from any
direction.
Please
type in true or false
(case sensitive).
2. What is your first
priority when working on RGPC property?
A.
Efficiency
B.
Deadlines
C.
Safety
D.
Quality
3. Which of the
following are prohibited while on RGPC property?
A.
Alcohol and drugs.
B.
Firearms or other deadly weapons.
C.
Knives with a blade longer than 3 inches.
D.
All of the above.
4.
What must be performed before the start of each day, or each time the
environment, physical characteristics or tasks change the working conditions?
A.
Security check.
B.
Morning meeting.
C.
Safety analysis.
D.
Job briefing.
5.
Basic PPE (Personal Protective Equipment) may include which of the
following?
A.
Safety glasses that provide side protection.
B.
Protective hardhat.
C.
Suitable protective gloves.
D.
All of the above.
6.
Is it permissible to walk, sit or step on rails, frogs, switches,
guardrails, interlocking machinery, or moveable connections?
A.
Yes, when necessary.
B.
No, under any circumstances.
7.
A railroad employee responsible for safety, instruction, performance,
and protection of all employees under his jurisdiction is known as what?
A.
Safety officer.
B.
Director of Safety and Rules
C.
Employee in charge.
D.
Compliance officer.
8.
When clearing the track for an approaching train, which of the
following procedures must be observed?
A.
Report to the location designated during the job briefing.
B.
Do not leave tools, material or objects where they may be struck
by a train.
C.
Stay clear of track while the train is passing.
D.
All of the above.
9.
If a roadway worker has an honest concern about whether on-track safety
procedures are in compliance with RGPC rules, what must they do?
A.
Be able to explain the concern about the protection provided.
B.
Immediately notify the employee in charge of all safety
concerns.
C.
Notify the foreman to shut down the worksite.
D.
Both A and B are correct.
10.
Does RGPC have the authority to shut down a project in the event of
failure to comply with its Safety Rules?
A.
Yes.
B.
No.
11.
Could flagrant, continuous and willful violations of RGPC’s Safety
Rules result in termination of a contract?
A.
Yes.
B.
No.
12. The contractor must promptly
notify RGPC of any:
A.OSHA reportable injury
B.Inspections conducted by federal, state or local government agencies
C.Damage to railroad property
D. All of the above
Please
type in a,b,c,or d
(case sensitive).
13. Before stepping over or crossing
tracks:
A.
Look in both directions
B. Step on rails to ensure good footing
C. Ensure red flags are set in each direction
D. All of the above
Please
type in a,b,c,or d
(case sensitive).
14. In addition to all requirements
contained in this orientation program, contractors must comply with all
federal and state regulations governing workplace safety.
A. True
B. False
Please
type in a or b
(case sensitive).
WHEREAS,
is
obtaining this orientation and any of the materials provided for
certain of its employees who work on or about railroad equipment, and
WHEREAS, THE Rio Grande Pacific Corporation,
hereinafter called "RGPC", is willing to provide this orientation and
any of the materials provided, but only upon the following terms and
conditions, NOW THEREFORE, it is agreed as follows: In consideration of this
orientation and any of the materials provided to the management of
your company or you as an individual for their internal use by you,
hereby assume all risk of and agrees to indemnify and hold RGPC and the
administrator of this site harmless
from any personal injury to or death of its officers, agents and employees,
and loss of or damage to property in its or their custody or possession,
which shall in any manner arise from or be alleged to be due to in, in whole
or in part, this orientation or materials provided to its employees by RGPC,
EXCEPT TO THE EXTENT SUCH INJURIES OR DAMAGES BE CAUSED BY OR
CONTRIBUTED TO BY THE INTENTIONAL MISCONDUCT OR GROSS NEGLIGENCE OF
RGPC , ITS OFFICERS, EMPLOYEES, AGENTS, OR ANY THIRD PARTY.
RGPC is hereby released and forever discharged, as well as its
subsidiary and affiliated companies, and the officers, agents, and employees
of said companies, from all claims, liabilities, and costs of every kind by
reason of any such injury to or death of persons and loss of or damage to
property. This Release shall be binding
upon the submission of this document.
I
understand that by submitting my name and, as applicable, the names of the other individuals
who have completed this orientation
section, I am indicating that these personnel have
actually completed this section of the orientation and understand this document. I am
an officer of the corporation named above, who is duly authorized and fully
empowered by said corporation to execute the same on its behalf or myself as
an individual.
If
you receive an error message when you submit your answers, you can email
your answers to the Webmaster for processing.
NOTE:
If you do not receive your course completion card within 10 working days
please email our office. webmaster@contractororientation.com